Architectural Roofing Systems

Bermuda Tile Gallery Permalink

Bermuda Tile Panel Details

Bermuda Tile Roofing consists of a horizontal panel available in 13” width with concealed fasteners. The Bermuda Tile is one of the oldest most traditional metal roofing profiles available. The Bermuda Tile consists of a horizontal panel and may be used in any residential or commercial application requiring a traditional design. The panels are available in continuous lengths with a variable coverage of 13” (vertical exposure).

The system features concealed clip and fastening approach allowing thermal contractions of the panel and at the same time concealing the fastener from corrosion. This system can also be utilized on fascia or mansard application and as a siding, for both remodeling and new construction. The panel design secures the female interlock hem into the male leg continuously, lending structural characteristics to apply it over open rafters or substrate by concealed clips allowing for unrestricted thermal movement. Optional sealant assures greater water tightness.


Materials and Finishes

Base Material: 24ga, and 26ga steel and .032 aluminum.


Pre-Painted Metal


24ga and 26ga galvalume conforming to ASTM A-791, 50 KSI with baked on 70% Kynar 500 finish in all standard colours Kynar 500 paint finish carries a full 10 year guarantee and are comprised of a .8 to .9 mil full strength 70% Kynar 500 fluorocarbon (polyvinylidene fluoride – PVF2) coating over an epoxy primer of .2 to .3 mil on the finish side with primer and wash coat on the reverse side. Face film thickness 1.0 mil and .2 mil.

Silicone Polyester


Substrate: zincalume G300 AZ 150, 24ga, 26ga.


Presentment: corrosion resistant property conversion coating.


Primer Coat: corrosion inhibitive primer. Normal thickness 5um each side custom formulated snow gun green.


Finish Coat: custom formulated system. Normal thickness 20 um on the top or weather side. The finish coat is available in several standard colours. On special request the finish coat can be applied to both sides to provide a 'double sided' product. With appropriate lead time provided specially required colours may be available.


Gloss: Normal 25% (60°). Other gloss levels may be available on request.


Galvalume (Aluzinc)


24ga galvalume conforming to ASTM – 791, 80 KSI where a coating of aluminum/zinc alloy bonded to the steel base by a continuous hot dipping process, offering greater corrosion resistance, high temperature oxidation resistance and heat reflectivity.

Mill finish galvalume (aluzinc) carries a 10 year warranty.

Installation Tips

Install panels in such a manner that horizontal lines are true and level and vertical lines are plumb.


Attach panels using manufacturer’s standard fasteners, spaced in accordance with approved shop drawings.


Install sealants for performed roofing panels as in approved shop drawings.


Do not allow panels or trim to come into contact with dissimilar materials.


Protect installed roof panels and trims from damage caused by adjacent construction until completion of installation.

Curved Tee Panel Product Gallery Permalink

Curved Tee Profile

Lifetime has revolutionized the architectural panel industry with the introduction of Curved Tee Panels. The panels are formed on site producing both convex (outside) and concave (inside) curved panels with a minimum radius of 4ft.


Advantages


Concealed Fasteners


Extruded curved span-op seams


Narrow 12” panels


Continious lengths up to 40 feet

Specifications


Panel Width: 12.75”


Effective Cover: 12.75”


Minimum Slope: 25 Degrees


Fastening System: solid, sheeted roof required. Concealed clip and 1”x 10×12 fastener required. Seam cap placed at seam junctions and screwed in place. 30lb felt underlay is recommended.


Gauges: 24


Finishes: polyester, PVF 2, Mill Finish, Kynar 50


Colours: see our Colour guide for our complete selection.


Material, Finishes and Base Material


24ga


0.032 Aluminum / .040 Aluminum


Prepainted Metal


24ga Galvalume Conforming To ASTM – 791, 80 KSI With Baked-on Perma Colour 2000 70% Kynar 500 In All Standard Colours Kynar 500 Paint Finish Carries A Full 10 Year Guarantee And Comprises Of 0.8 To 0.9 Full Strength 70% Kynar 500 Fluorocarbon (Polyvinylidene Fluoride – PVF2 Coating Over An Epoxy Primer And Wash Coat On Reverse Side. Face Film Thickness 1.0 and 0.2

Silicone Polyester


Substrate: zincalume g300 az 150, 24ga, 26ga pretreatment: corrosion resistant property conversion coating.


Primer cost: corrosion inhibitor primer. Normal thickness 5um each side custom formulated snow gun green.


Finish Coat: custom formulated system. Normal thickness 20 um on the top or weather side. The finish coat is available in several standard colours. On special request the finish coat can be applied to both sides to provide a 'double sided' product. With appropriate lead time provided specially required colours may be available.


Gloss: normal 25% (60°). Other gloss levels may be available on request.


Galvalume (Aluzinc)


24ga and 26ga galvalume conforming to ASTM-791, 80 KSI which is bonded to the steel by a continuos hot dipping process, offering greater corrosion resistance, high temperature oxidization resistance and heat reflectivity.

Installation Tips

Lifetime Solutions Curved & Straight Tee Panel Profile


Install panels in such a manner that horizontal lines are true and level and vertical lines are plumb.


Attach panels using manufacturer’s standard fasteners, spaced in accordance with approved shop drawings.


Install sealants for performed roofing panels as in approved shop drawings.


Do not allow panels or trim to come into contact with dissimilar materials.


Protect installed roof panels and trims from damage caused by adjacent construction until completion of installation.

Tapered Profile / Compound Curve Roofing Product Gallery Permalink

Tapered Profile / Compound Curve Roofing Profiles

Lifetime has revolutionized the architectural panel industry with the introduction of Curved Tee Panels. The panels are formed on site producing both convex (outside) and concave (inside) curved panels with a minimum radius of 4ft.

Advantages


Concealed Fasteners


Extruded curved span-op seams


Narrow 12” panels


Continuous lengths up to 40 feet

Specifications


Panel Width: 12.75”


Effective Cover: 12.75”


Minimum Slope: 25 Degrees


Fastening System: solid, sheeted roof required. Concealed clip and 1”x 10×12 fastener required.
Seam cap placed at seam junctions and screwed in place. 30lb felt underlay si recommended.


Gauges: 24


Finishes: polyester, PVF 2, Mill Finish, Kynar 50


Colours: See our Colour guide for our complete selection.


Material, Finishes and Base Material


24ga


0.032 Aluminum / .040 Aluminum


Prepainted Metal


24ga Galvalume Conforming To ASTM – 791, 80 KSI With Baked-on Perma Colour 2000 70% Kynar 500 In All Standard Colours Kynar 500 Paint Finish Carries A Full 10 Year Guarantee And Comprises Of 0.8 To 0.9 Full Strength 70% Kynar 500 Fluorocarbon (Polyvinylidene Fluoride – PVF2 Coating Over An Epoxy Primer And Wash Coat On Reverse Side. Face Film Thickness 1.0 and 0.2

Silicone Polyester


Substrate: zincalume g300 az 150, 24ga, 26ga pretreatment: corrosion resistant property conversion coating.


Primer cost: corrosion inhibitor primer. Normal thickness 5um each side custom formulated snow gun green.


Finish Coat: Custom formulated system. Normal thickness 20 um on the top or weather side. The finish coat is available in several standard colours. On special request the finish coat can be applied to both sides to provide a 'double sided' product. With appropriate lead time provided specially required colours may be available.


Gloss: normal 25% (60°). Other gloss levels may be available on request.


Galvalume (Aluzinc)


24ga and 26ga galvalume conforming to ASTM-791, 80 KSI which is bonded to the steel by a continuos hot dipping process, offering greater corrosion resistance, high temperature oxidization resistance and heat reflectivity.

Installation Tips

Lifetime Solutions Curved & Straight Tee Panel Profile


Install panels in such a manner that horizontal lines are true and level and vertical lines are plumb.


Attach panels using manufacturer’s standard fasteners, spaced in accordance with approved shop drawings.


Install sealants for performed roofing panels as in approved shop drawings.


Do not allow panels or trim to come into contact with dissimilar materials.


Protect installed roof panels and trims from damage caused by adjacent construction until completion of installation.

Colour Chart

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

Structural Panel Systems

Standing Seam Gallery Permalink

Standing Seam System

Lifetime Series 2000 1 ¾” High Structural & Architectural Snap Lock Standing Seam.

One of Lifetime’s most popular system, the Series 2000 integral snap-lock panel system combines architectural versatility—for cleanly detailed, continuous seam transitions from roof to mansard, fascia, wall panel or soffit—with the dramatically increased spanning and uplift capabilities of a structural system.

The panel design secures the male interlock hem into the female leg continuously, lending structural characteristics to apply it over purlins. The panel is secured to the purlins or substrate by clips allowing for unrestricted thermal movement; all fasteners are concealed; the clip design provides for a 1/4” clearance between the flat surface of the panel and the substrate, allowing ventilation underneath. Optional sealant assures greater water-tightness. Installation is a snap; no labor intense mechanical seaming: just secure the male leg with clips and snap the panels in place.


Material and Finishes

Base Material: 24ga, and 26ga steel and .032 aluminum.


Prepainted Metal


24ga Galvalume Conforming To ASTM – 791, 80 KSI With Baked-on Perma Colour 2000 70%
Kynar 500 In All Standard Colours Kynar 500 Paint Finish Carries A Full 10 Year Guarantee And Comprises
Of 0.8 To 0.9


Full Strength 70% Kynar 500 Fluorocarbon (Polyvinylidene Fluoride – PVF2 Coating Over An Epoxy
Primer And Wash Coat On Reverse Side. Face Film Thickness 1.0 and 0.2



Galvalume (Aluzinc)


24ga and 26ga galvalume conforming to ASTM-791, 80 KSI which is bonded to the steel by a continuous hot dipping process, offering greater corrosion resistance, high temperature oxidization resistance and heat reflectivity.

Aluminum


.032 aluminum alloy 3105-414 with baked on PermaColor 2000 Kynar in all standard colours.

Silicone Polyester


Substrate: zincalume G300 AZ 150, 24ga, 26ga


Presentment: corrosion resistant property conversion coating.


Primer Coat: corrosion inhibitive primer. Normal thickness 5um each side custom formulated snow gun green.


Finish Coat: custom formulated system. Normal thickness 20 um on the top or weather side. The finish coat is available in several standard colours. On special request the finish coat can be applied to both sides to provide a 'double sided' product. With appropriate lead time provided specially required colours may be available.


Gloss: Normal 25% (60°). Other gloss levels may be available on request.


Flashing and Flat Stock


All exposed flashings shall be formed in same guage, finish, colour and texture matching the panels. See Construction details over.

System Applications


As an integrated roofing system, Series 2000 1 3/4″ high Structural Snap Lock panels may be installed on low slopes, over purlins or solid deck. Series 2000 panels may also be installed over rigid insulation, with clips and bearing plates.


Medium duty for residential, commercial and industrial use


3”/12” minimum slope


Can be installed over a solid deck or open framing


Requires seam sealant if air and water tests are specified


Engineering available for various panel sizes and substrates upon request


Substrates


26, 24 and 22 guage steel


0.032” and 0.040” aluminum

System Warranties


Galvalume Plus® — 25-year steel warranty on acrylic coated Galvalume®


PermaColor 2000 — 30-year steel or aluminum warranty on Kynar 500®/Hylar 5000® coating.


PermaMetallic 2000 — 20-year steel or aluminum warranty on Kynar 500®/ Hylar 5000® coating.


Siliconized Modified Polyester — 15-year steel or aluminum coating warranty

Ratings and Certifications


UL-90 rated over 22 guage metal deck at 18” wide with clips at 48” o.c. (24 ga. steel)


UL-90 rated over 16 guage purlins at 18” wide with clips at 48” o.c. (24 ga. steel)


ASTM-E-1646-95 and ASTM-E-331 water penetration tested ASTM-E-1680-95 and ASTM-E-283 air infiltration tested


ASTM-E-1592-98 and ASTM-E-330 uplift tested (24 ga. steel)


ASTM-E-84 Class A fire rating on coating and substrate


Metro-Dade County certified, acceptance no. 01-0213.01 (metal deck)


Metro-Dade County certified, acceptance no. 01-0420.01 (wood deck)


Corrugated Panel Gallery Permalink

Corrugated

Lifetime Corrugated Panel is structurally very strong and ideal for the traditional colonial look. The 39-inch wide panels come in continuous lengths up to 60 inches.

Our Corrugated Panels are made of steel and aluminum, and there is a choice of finishes.


Materials and Finishes

Base Material: 24ga, and 26ga steel and .032 aluminum.


Pre-Painted Metal (Backed by a full 10 year guarantee)


Paint is actually baked onto galvalume after surface is primed with an epoxy primer followed by fluorocarbon coating. A protective wash coat covers the underside.

Silicone Polyester


Substrate: zincalume G300 AZ 150, 24ga, 26ga


Presentment: corrosion resistant property conversion coating.


Primer Coat: corrosion inhibitive primer. Normal thickness 5um each side custom formulated snow gun green.


Finish Coat: custom formulated system. Normal thickness 20 um on the top or weather side. The finish coat is available in several standard colours. On special request the finish coat can be applied to both sides to provide a ’double sided' product. With appropriate lead time provided specially required colours may be available.


Gloss: Normal 25% (60°). Other gloss levels may be available on request.

Galvalume


A coating of aluminum is bonded to a steel base by a continuous hot dipping process which renders the roof highly heat reflective and greatly resistant to corrosion and high temperature oxidation.


Installation Tips

Install panels in such a manner that horizontal lines are true and level and vertical lines are plumb.


Attach panels using manufacturer’s standard fasteners, spaced in accordance with approved shop drawings.


Install sealants for performed roofing panels as in approved shop drawings.


Do not allow panels or trim to come into contact with dissimilar materials.


Protect installed roof panels and trims from damage caused by adjacent construction until completion of installation.

R Panel Gallery Permalink

R-Panel

Lifetime “R” Panel roof is an economical alternative. It is also known as the Traditional Trapezoid Roof System. The 42-inch wide panels come in continuous lengths up to 50 feet.

Our “R” Panels are made of steel and aluminum, and there is a choice of finishes: Prepainted Material, Silicone Polyester and Galvalume (Aluzinc).


Traditional Trapezoid Roof System


Wide 42” coverage

Versatile, roofing, wall, soffit, faxcia or mansards

Easy installation

Continuous length panels – up to 40”

Economical

Specifications


Panel Width: 43”


Effective Cover: 41”


Minimum Slope: 10 Degrees


Fastening System: the panel to panel and panel to steel / wood connection to be with a no. 12 – 14 self drilling fastener with a high quality neoprene washer. The panel to panel connection requires a 1 1/2“ minimum fastener.


Gauges: 24, 26, 28


Finishes: polyester, PVF 2, Mill Finish, 70% Kynar 500


Colours: see our colour guide for our complete selection.


Lengths: the panels are factory formed to a maximum length of 60”

Material and Finishes Base Material


24ga


0.032 Aluminum / .040 Aluminum


Prepainted Metal


24ga Galvalume Conforming To ASTM – 791, 80 KSI With Baked-on Perma Colour 2000 70% Kynar 500 In All Standard Colours Kynar 500 Paint Finish Carries A Full 10 Year Guarantee And Comprises Of 0.8 To 0.9 Full Strength 70% Kynar 500 Fluorocarbon (Polyvinylidene Fluoride – PVF2 Coating Over An Epoxy Primer And Wash Coat On Reverse Side. Face Film Thickness 1.0 and 0.2

Silicone Polyester


Substrate: zincalume g300 az 150, 24ga, 26ga pretreatment: corrosion resistant property conversion coating.


Primer cost: corrosion inhibitor primer. Normal thickness 5um each side custom formulated snow gun green.


Finish coat: custom formulated system. Normal thickness 20 um on the top or weather side.


The finish coat is available in several standard colours. On special request the finish coat can be applied to both sides to provide a ‘double sided’ product. With appropriate lead time provided specially required colours may be available.


Gloss: normal 25% (60°). Other gloss levels may be available on request.


Galvalume (Aluzinc)


24ga and 26ga galvalume conforming to ASTM-791, 80 KSI which is bonded to the steel by a continuos hot dipping process, offering greater corrosion resistance, high temperature oxidization resistance and heat reflectivity.


Installation Tips

Install panels in such a manner that horizontal lines are true and level and vertical lines are plumb.


Attach panels using manufacturer’s standard fasteners, spaced in accordance with approved shop drawings.


Install sealants for performed roofing panels as in approved shop drawings.


Do not allow panels or trim to come into contact with dissimilar materials.


Protect installed roof panels and trims from damage caused by adjacent construction until completion of installation.

Colour Chart

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

External/Internal Ceiling Systems

Flush Seam Soffit Gallery Permalink

Flush Seam Soffit

Custom Fabricated Flush Seam Panels


Flat panel with 1” structural concealed


Custom lengths


Maintenance free


Professional finish


Optional Pencil Ribs or flat panels


Easy Installation Snap Lock panels


Versatile, Maintenance-free, prefinished metal Fascia, Facade, Wall or Soffit Panels for Open Spans.


Channel Drain Interlock


Narrow, Strong panel


Flat, Smooth Appearance


Hidden Fasteners


Thin Extruded Appearance


Use Horizontally for Soffit Panel


Use Vertically for Facade, Fascia or Wall Panel


Perforated Vent Panels Available

Specifications


Panel Width: varible 20”


Effective Cover: varible 20”


Minimum Slope: 0 Degrees


Fastening System: concealed fastening system. The panel is fastened to the wall angles and fasciatrim with pph fasteners.


Gauges: 24, 26, 28


Finishes: polyester, PVF 2, Mill Finish, 70% Kynar 500


Colours: see our colour guide for our complete selection.


Lengths: as required


Vent Panels: optional perforated panels for air flow

DECRA Heritage Tile Gallery Permalink

DECRA Heritage Tile

Timeless and elegant, DECRA heritage tile has the scalloped profile of a traditional Mediterranean clay tile.


Specification

Overall Length 1330 mm

Length of Cover 1257 mm

Width of Cover 369 mm

Up stand 25 mm

Roof cover/Tile 0.46 m²

Coverage 2.2 tile /m²

Weight/unit Textured 2.9 kg

Satin 2.1 kg

Roof Pitch Roof pitch 12° to 90°

Available Colours

Stone Coated


Charcoal

Garnet

Teak

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colours. Sample chips are available on request at no charge.

Satin Finish


Russet

Smoke Grey

Due to the limitation of digital rendering processes, this colour chart is not an accurate representation of our actual colours. Sample chips are available on request at no charge.

Attachments

Additional Detials here:

Decra Heritage Decra Heritage - Installation Guide

DECRA Shake Gallery Permalink

DECRA Shake

Reflecting the charm of colonial times, DECRA Shake is designed to replicate the look and feel of a handmade real wood shake.


Specification

Overall Length 1310 mm

Length of Cover 1250 mm

Width of Cover 370 mm

Up stand 27 mm

Roof cover/Tile 0.46 m²

Coverage 2.2 tile /m²

Weight/unit Textured 3 kg

Satin 2.1 kg

Roof Pitch Roof pitch 15° to 90°

Available Colours

Stone Coated


Charcoal

Cedar

Garnet   Spanish Red

Teak

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

Satin Finish


Grey Birch

Pastel Green

Storm Grey

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

DECRA Classic Tile Gallery Permalink

DECRA Classic Tile

Designed for homes that need a bolder, stronger-looking roof, DECRA Classic Tile mixes edgy innovation with old- world charm.


Specification

Overall Length 1320 mm

Length of Cover 1270 mm

Width of Cover 370 mm

Up stand 25 mm

Roof cover/Tile 0.46 m²

Coverage 2.2 tile /m²

Weight/unit Textured 3.2 kg

Satin 2.1 kg

Roof Pitch Roof pitch 12° to 90°

Available Colours

Satin Finish


Storm Grey

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

DECRA Shingles Gallery Permalink

DECRA Shingles

With a unique profile that changes mood with the angle of the sun, DECRA Shingle creates a roof that echoes the elegance of yesteryear’s finest buildings and homes.


Specification

Overall Length 1320 mm

Length of Cover 1250 mm

Width of Cover 368 mm

Up stand 16 mm

Roof cover/Tile 0.46 m²

Coverage 2.2 tile /m²

Weight/unit Textured 3 kg

Satin 2.1 kg

Roof Pitch Roof pitch 15° to 90°

Available Colours

Stone Coated


Charcoal

Bark

Midnite Eclipse

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

DECRA Milano Tile Gallery Permalink

DECRA Milano Tile

Inspired by traditional Roman tile design, DECRA Milano Tile looks smooth, clean and elegant. Its timeless profile makes a strong style statement, especially on steeply pitched roofs.


Specification

Overall Length 1335 mm

Length of Cover 1215 mm

Width of Cover 368 mm

Up stand 22 mm

Roof cover/Tile 0.45 m²

Coverage 2.2 tile /m²

Weight/unit Textured 2.9 kg

Roof Pitch Roof pitch 12° to 90°

Available Colours

Stone Coated


Rosso

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

Attachments

Additional Detials here:

Decra Milano - Installation Guide

DECRA Villa Tile Gallery Permalink

DECRA Villa Tile

DECRA’s Villa Tile combines the superior performance of steel with the classic beauty, elegance and architectural detail of an old world Italian tile.


Specification

Minimum Pitch: 3:12

Panel Size: 17" x 44-1/4"

Thickness: 26 guage, .0179 inches

Installed Exposure: 14-1/2" x 39-1/2"

Panels per Square: 25.2

Installed Weight: 160 lbs. / sq.


Features

Unique Hidden Fastener System

"Cut & Tuck" Technology

No Special Tools Required

Direct to Deck Application

Transferable 50 - year Limited warranty (including 120 mph winds and hail penetration)

Class 4 Impact Resistance to UL 2218 by Underwriters Laboratories (Highest Rating)

Lightweight - Only 160 lbs. per sq. installed (sq. = 100 sq. ft.)

Non-Combustible Class A Rated Material

Won't Crack, break, Burn, Curl, Split or Rot

Walkable, Low Maintenance, Long Life

Non-Porous, Freeze / Thaw Resistant

Interlocking Panels Provide Protection against the Elements

Available Colours

Stone Coated


Venetian Gold

Due to the limitation of digital rendering processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge.

Attachments

Additional Detials here:

DECRA Villa DECRA Villa - Installation Guide

Skylight Systems

42" Polycarbonate R-Panel Sheets Gallery Permalink

42" Polycarbonate R-Panel Sheets

Lifetime Solutions 42” Polycarbonate R-Panel Sheets offer a variety of light transmission and color options, while also providing maximum impact resistance and a broad service temperature range.


Virtually unbreakable

Impact resistant

Lifetime limited warranty on weathering

Up to 90% transmission

Weather & UV resistant

Lightweight

Excellent fire rating

Easy to install

Specifications:

Lengths Available: 19’

Width: 42”

Colours Available: Blue, Green, Clear, White Diffuser

Typical Applications

These sheets are ideal for a wide range of professional and Do-It-Yourself applications. Transparent & diffused panels make excellent skylights, sidelights, and greenhouse glazing, while colored panels can be used for nearly any roofing or siding (cladding) application.

Limited Lifetime Warranty

The Polycarbonate panels shall not lose more than 8.5% of its light transmitting capacity from the original date purchased for a period of 10 years and no more than 1% per year thereafter as a direct result from the impact of solar radiation.

General Polycarbonate Cleaning Guidelines

Avoid contact with chemicals, paints, adhesives or other synthetic materials that are incompatible with polycarbonate. Never use glass cleaners with ammonia, or ammonia based products. Clean with lukewarm soapy solution using a soft cloth or sponge. Do not use abrasive brushes as these will mark the surface.


Additional Detials here:

Regulatory Code Compliance Certification Properties Polycarbonate Skylights Product Specifications

Glass Skylights Gallery Permalink

Glass Skylights

Through the use of modern technology, automated design and manufacturing, a wide range of glass skylights can be detailed, ordered, fabricated and installed in a simple and orderly process. The glass skylight system design is based on the latest daylighting technology and incorporates system enhancements developed with the CPI Daylighting design team's 100 years of combined daylighting experience. Glass Skylight daylighting systems are laboratory tested and certified.


CPI Daylighting Glass Skylight Systems

Education

Healthcare

Military

Athletic & Aquatic

Retail

Corporate Offices

Transportation & Parking Structures

Cultural & Community

Hotel & Entertainment

Industrial

Daylighting Retrofits


Lifetime Solutions will customize glass skylights to your specification design and needs.
Please contact us directly for more information.

Insulated Translucent

Glass Skylights

Single Panel Translucent Glazing

Intelligent Controlled Daylighting

Fortiza Tile Gallery

Fortiza Tile

Lifetime Solutions brings you Fortiza, the roofing system designed specifically for the rapidly growing housing market, where budgets are tight but overall looks are highly important. At a time when the cost of building materials around the world is increasing. Fortiza bridges the gap; sustaining quality in the face of increased demand for lower costs.